Visual Inspection

The  site  will  be inspected  for  noting  down  the  external  and  internal  repairs  to  be  carried  out  along  with  the  representative  of  the  society. During  this  measurement  for  the  quantities  for  various  items  shall  be  work  out.

Internal survey

The internal survey will be carried form flat to flat by knocking hammer of each RCC member viz. (column, beam & slab) to check the extent of distress structural members & seepage/leakage inside the flats from external surface as well as from terrace/w.c/bath/kitchen areas. During this the defects observed in each flats shall be mark in the observation sheet flat wise.

External survey

The external survey will be carried out for noting down the defects in original construction & there after due to improper maintenance of the building. And its need for repair for various structural repairs, plastering, plumbing, terrace water proofing, o/h tank & other allied works.

Non-Destructive test

During the course of survey, if felt necessary the society shall advise to carry out ultra pulse velocity & rebound hammer test to check, as whether there is any possible internal cracking, honey combing or voids in concrete. To assess the quality control of construction. Charges for the same shall be separate.

Site measurement

All the necessary measurement will be taken during the survey work.

Remedial measures

The detail report stating the necessary remedial measures to be carried out will be submitted for various activities.

Estimation

Estimates for all the necessary item of work will be prepared and proper B.O.Q of the same shall be submitted based on the prevailing workable market rate.